Siemens Gigaset C28H, Instruction Manual

7

Gigaset 28H – First Steps

Gigaset 28H / CAN useng / A31008-M1963-R401-1-5819 / starting.fm / 26.1.09

Ve

rs

ion 4,

 16

.09.

2005

Attaching the belt clip

There are notches on the sides of the 

handset for attaching the belt clip, nearly 

at the same height as the handset ear-

piece.

¤

Press the belt clip onto the back of the 

handset so that the protrusions on the 

belt clip engage the notches.

Placing the handset in the charging 

cradle

¤

Place the handset in the charging cra-

dle with the handset's 

display facing 

outwards

. 

Charging the batteries for the first time

¤

To charge the batteries, leave the hand-

set in the charging cradle 

continuously

for 

ten

 hours.

The alternately flashing battery icons 

=

U

 on the upper right side of the display 

screen indicate that the batteries are 

being charged.

For questions and troubleshooting, 

see page 15.

Setting the date and time

You should set the date and time, for 

example, to ensure the correct time of 

incoming calls is recorded.
To change the time and date, open the 

input field using:

§Menu§

¢

s

¢

Settings 

¢

Date/Time 

¢

Set Date/Time

~

Enter the time and date using 

10 digits, for example, 

Q 

M 1 5 Q 1 1 

5 Q N

 for January 15, 

2008, 07:15 AM. If the 

12-

hour

 time format is set, use 

the 

*

 key to switch between 

am and pm.
To correct an incorrect entry, 

overwrite the character by typ-

ing the correct one.

§OK§

Press the display key to save 

changes.

You can change the date and time format:

§Menu§

¢

s

¢

Settings 

¢

Date/Time 

¢

Set Format

¤

Choose between day/month and 

month/day date formats:

s

¢

Date Format 

¢

DD/MM

 or 

MM/DD

¤

Choose between 12- and 24-hour time 

formats:

s

¢

Time Format 

¢

12 Hours

/ 

24 Hours

Note:

– If the handset has turned itself off because 

its batteries are empty, and you then place 

the handset into the base station, it will 

turn on automatically.

– Only place the handset into the base sta-

tion or charging cradle specifically 

intended for it.

– During handset operation, the battery icon 

e

indicates the charge status of the bat-

teries (page 1).

– The batteries may feel warm when they are 

charging. This is not dangerous.

Note:

Date and time settings apply to base station 

and all registered handsets. 
Date and time format settings apply only to 

your own handset. You must set date and time 

format at each device separately.