background image

110

Info Center – continuous Internet access from your phone

Gigaset C590 IP / IM-OST EN / A31008-M2215-R601-1-TE19 / Info_Center.fm / 22.12.10

V

e

rsion 4, 16.0

9

.2005

Customising info services

For some info services you can customise the information that you want from your 
Gigaset phone yourself. 

¤

Click the icon that belongs to an info service (e.g., weather). This will open 
another Web page where you can customise the RSS feeds. 

The Web pages for the individual info services describe which settings you can 
make. 

Example "weather information"

¤

Click the icon for the weather information. This will open a Web page to config-
ure the weather information for your Info Center. 

The world weather is already set. 

You can also set up to nine other locations (worldwide) that you can request 
weather information for.

¤

Enter the name of the location that you want to access weather information for 
in the editable field.

¤

Click the magnifying glass icon 

.

This will list the locations that start with the specified name. 

¤

Click the list icon to open the list and select the required location.

¤

Right-click the arrow icon 

 to add this location to your Info Center.

The Web page lists all the locations for which the Info Center provides weather 
information. 

¤

If a location is deleted from the list, click the trash icon 

 after the location 

name. 

¤

Click the disk icon 

 at the top right of the Web page to save your settings.

Please note

You can also configure weather information on the handset itself. 

¤

Start the Info Center on your handset 

(

¢

page 112)

.

¤

Select the entry for the weather information and press the display key 

§OK§

¤

Select the entry "Add location" and press 

§OK§

.

¤

Specify which location you want the weather information to be displayed for 
and press 

§OK§

. This will show a list of locations with the name specified. 

¤

Select the required location and press 

§OK§

¤

Press OK again to confirm your selection. 

Summary of Contents for Gigaset C590 IP































































































































































































































Reviews: