132
Connecting/using other handsets
Gigaset C590 IP / IM-OST EN / A31008-M2215-R601-1-TE19 / HS_and_other_Devices.fm / 22.12.10
V
e
rsion 4, 16.0
9
.2005
External call waiting during an internal call
If you receive an
external
call during an
internal
call, you will hear the call waiting
tone (short tone). The caller's number appears in the display if Calling Line Identifi-
cation is enabled.
You have the following options:
Rejecting the external call
§Reject§
Press the display key.
The call waiting tone is turned off. You remain connected with the internal partici-
pant.
For calls to a VoIP connection: the external caller hears the busy tone.
For calls to the fixed line connection:
The call continues to be signalled on the registered handsets.
Accepting an external call/Putting an internal party on hold
§Accept§
Press the display key.
You are connected to the external caller. The internal call is placed on
hold
.
You have the following options:
u
Swap between both participants:
¤
Use
q
to swap between the participants.
u
Speak to both participants at the same time:
¤
Press the display key
§Conf.§
to establish the conference call. Press the display
key
§EndConf§
to return to call swap mode.
Ending an internal call
a
Press the end call key.
The external call is signalled as an incoming call. You can accept the call
.
Internal call waiting during an internal/external call
If an internal party attempts to call you while you are involved in an external or
external call, this call is shown on the display (internal call waiting). You can either
accept or reject this call.
Press any key to make this prompt disappear from the display.
You must end the current call to accept the internal call. Then the internal call is sig-
nalled as per usual. You can accept the call.