155
Connecting the phone to a PABX
Gigaset C590 IP / IM-OST EN / A31008-M2215-R601-1-TE19 / PABX.fm / 15.12.10
V
e
rsion 4, 16.0
9
.2005
Connecting the phone to a PABX
The following settings are only necessary if your PABX requires them; see the PABX
user guide.
Dialling modes and recall
The current setting is indicated by
Ø
.
Changing the dialling mode
The following dialling modes can be selected:
u
Tone dialling (
Tone
),
u
Pulse dialling (
Pulse
).
Regardless of the setting options above, after dialling or during a call, the phone
automatically switches to tone dialling (DTMF) e.g., for controlling an answering
machine remotely.
v
¢
Ï
¢
Telephony
¢
Dialling Mode
s
Select dialling mode and press
§Select§
(
Ø
= selected).
Setting recall (fixed line)
By default, your phone is set for operation on the main connection (recall 250 ms).
For operation on a PABX, you may have to change this value. Please refer to the user
guide for your PABX.
v
¢
Ï
¢
Telephony
¢
Recall
s
Select recall and press
§Select§
(
Ø
= set value). Possible values include:
80 ms, 100 ms, 120 ms, 180 ms, 250 ms, 300 ms, 400 ms, 600 ms,
800 ms.
Please note
You cannot send or receive SMS messages on PABXs that do not support Calling
Line Identification.
•