173
Configuring the phone via the Web configurator
Gigaset C590 IP / IM-OST EN / A31008-M2215-R601-1-TE19 / web-conf.fm / 22.12.10
V
e
rsion 4, 16.0
9
.2005
Assigning send and receive connections
For the number assignment, open the Web page:
Settings
¢
Telephony
¢
Number Assignment
Assign send and receive connections to the registered handsets.
Please note:
u
During registration, each handset is automatically assigned the fixed line con-
nection as a send connection and all base connections as receive connections.
u
You can assign each handset either a fixed send connection or a connection
selection. For connection selection, you choose the connection to be used for
each call.
u
The Gigaset.net number is fixed as the send connection for each registered
handset. Numbers that end in #9 are automatically dialled via Gigaset.net.
Activating the fixed line connection as the fallback send
connection
You can activate the fixed line connection on your phone as a fallback connection.
If a call attempt fails via VoIP, an attempt is automatically made (without prompting)
to establish a connection via the fixed line.
A fallback is used in the following situations:
u
Your VoIP connections are busy
u
The SIP server for the VoIP connection cannot be accessed
u
The dialled VoIP connection has not yet been configured or has not been con-
figured correctly (e.g., incorrect password)
u
The phone does not have a connection to the Internet, for example, because
your router is deactivated or not connected to the Internet.
The option to activate the fallback connection is on the Web page:
Settings
¢
Telephony
¢
Number Assignment
Please note
u
You can override the assignment of the send connection for certain phone
numbers by defining dialling plans for these numbers.
u
For number assignment
Exception
SMS messages that are to be sent via a VoIP connection are
not
sent via the fall-
back connection.
