180
Configuring the phone via the Web configurator
Gigaset C590 IP / IM-OST EN / A31008-M2215-R601-1-TE19 / web-conf.fm / 22.12.10
V
e
rsion 4, 16.0
9
.2005
Understanding directory file content (vcf file)
The following data (if available) is written into the vcf file for entry into the directory
or transferred from a vcf file into the handset directory.
u
Name
u
First name
u
Number
u
Number (office)
u
Number (mobile)
u
E-mail address
u
Birthday (YYYY-MM-DD) and time of the reminder call (HH:MM) separated by
a "
T
" (example: 2008-12-24T11:00).
Other information that a vCard may contain is not entered into the handset direc-
tory.
Example of an entry in vCard format:
BEGIN:VCARD
VERSION:2.1
N:Smith;Anna
TEL;HOME:1234567890
TEL;WORK:0299123456
TEL;CELL:0175987654321
E-MAIL:anna@smith.com
BDAY:2008-12-24T11:00
END:VCARD
Saving and restoring system settings
Once you have configured your base and after each configuration change, you can
save the current base settings in a file on the PC (suffix .cfg).
If you change the settings accidentally or you need to reset the base due to a fault
(base reset), you can reload the saved settings from the file on your PC to your
phone.
The contents of the .cfg file include:
u
The settings for the local network (IP configuration)
u
The data for the (VoIP) connections established
u
The assignment of send and receive connections
u
Your own local area code and access code
u
The network mailbox number
u
The Internet services settings
u
The ECO DECT settings.
You can save and restore the system settings via the Web page:
Settings
¢
Management
¢
Save & Restore