37
Setting the handset
Gigaset C59H / USA-CAN engl / A31008-M2150-R301-1-3S19 / registr_sett.fm / 17.05.2010
V
e
rsion 4, 16.0
9
.2005
When the room monitor function is acti-
vated, the idle display appears as shown
below:
Changing the set destination
number
v
¢
É
¢
Room Monitor
¤
Enter and save number as described
under "Activating the room monitor and
entering the destination number"
(
Cancel/deactivate room monitor
Press the end call key
a
to cancel the call
when the
room monitor is activated
.
In the idle status,
press the display key
§Off§
to deactivate room monitor mode.
Deactivating the room monitor
remotely
Prerequisites
: The phone must support tone
dialing and the room monitor should be set
for an external destination number.
¤
Accept the call from the room monitor
and press keys
9
;
.
The call ends immediately and the room
monitor function deactivates. There will be
no further room monitor calls.
To reactivate the room monitor function
with the same phone number:
¤
Reactivate and save with
§Save§
¢
Setting the handset
Your handset is preconfigured, but you can
change the settings to suit your individual
requirements.
Quickly accessing numbers
and functions
You can assign a
number from the directory
to each of the
digit keys
Q
and
2
to
O
.
The left and right
display keys
have a
func-
tion
pre-selected by default. You can change
the assignment (
The number is then dialed or the function
started by simply pressing a key.
Assigning digit keys (quick dial)
Prerequisite:
You have not yet assigned a
number to the digit key.
¤
Press and
hold
the digit key.
or:
Press the digit key
briefly
and press the
§QuickDial§
display key.
The directory opens.
¤
Select an entry and press
§OK§
.
The entry is saved to the appropriate digit
key.
i
V
07:15 am
INT 1
Oct 22
Á
Room Monitor
9725551234
Off
Options
Please note
If you delete or edit the entry in the direc-
tory at a later date, this will not affect the
assignment to the number key.
