background image

28

First steps

DL500A/DX600A-ISDN/DX800A / GRC EN / A31008-N3101-T101-1-8U43 / starting.fm / 27.10.10

V

e

rsion 4, 16.0

9

.2005

Starting the connection wizard 

a.

¤

Press the display key 

§Yes§

, if you 

wish to change the setting for the 
send and receive connection of the 

base

 (internal name 

INT 1

). 

¤

Press the display key 

§No§

, if you do 

not wish to change the setting for 
the base. 

b.

(Display for ISDN connection)

Or:

(Display for fixed line connection)

The list of receive connections cur-
rently assigned is displayed. 

Press down on the control key 

s

 to 

scroll through the list if necessary. 

¤

Press the display key 

§Change§

, if 

you wish to change the receive 
connection setting for the base. 

¤

Press the display key 

§OK§

, if you do 

not wish to change the setting. 

Note on DX800A all in one: 

A Gigaset.net phone number is 
already assigned to the base on 
delivery. You can also assign the 
Gigaset.net number to all connected 
devices as a receive connection. 

Press 

§OK§

 to skip the following steps. Continue from  

£

e.

Press 

§Change§

 to display the following:

Connection Wizard

 

?

Assign connections 

to desk phone 

INT 1?

No

Yes

Receive Connections

Ð

INT 1

receives calls for

MSN1: 12345601

MSN2: 12345602

MSN3: 12345603

V

Change

OK

Receive Connections

Ð

INT 1

receives calls for

Fixed Line: 4560123

IP1: 12345602

Gigaset.net: 12345#9

V

Change

OK

Summary of Contents for Gigaset DX600A ISDN






































































Reviews: