40
Using several handsets
Gigaset S440-445 / IM-engl / A31008-M1635-A661-1-7619 / registration.fm / 07.06.2005
Using several handsets
Registering handsets
You can register up to a total of six hand-
sets on your base station.
A Gigaset S44 handset can be registered
on up to four base stations.
Automatic registration Gigaset S44 to
Gigaset S445
Important
: The handset must not already
be registered to any base station.
Registration of the handset to the Gigaset
S445 base station occurs automatically.
¤
Place the handset in the base station
with its
display facing forward
.
Registration takes around 1 minute. Dur-
ing this process
Regstr.Procedure
appears
in the display and the name of the base
station flashes e.g.
Base 1
.When the hand-
set has registered, its screen displays its
internal number, e.g.
INT 2
for internal
number 2. The handset is assigned the
lowest available internal number (1-6).
If all internal numbers 1-6 have been
assigned, number 6 is overwritten, pro-
vided the handset with the internal
number 6 is in idle status.
Manual registration Gigaset S44 to
Gigaset S445
You must activate manual registration of
the handset at both the handset and the
base station.
After it has registered, the handset returns
to idle status. The internal number of the
handset appears in the display, e.g.
INT 1
.
If it does not, repeat the procedure.
On the handset
v
¢
Ð
¢
Handset
¢
Register H/Set
s
Select base station, e.g.
Base 1
and press
§OK§
.
~
Enter the system PIN of the
base station (the default is
0000) and press
§OK§
. The
screen will display, e.g.
Base
1
.
On the base station
÷
Within 60 secs. press and
hold
the registration/paging key on
the base station (approx. 3
secs.).
Registering other handsets
You can register other Gigaset handsets
and handsets for other devices with GAP
functionality as follows.
On the handset
¤
Start to register the handset as
described in its user guide.
On the base station
÷
Press and
hold
the registra-
tion/paging key on the base
station (approx. 3 secs.).
Notes:
– Automatic registration is not possible when
the base station on which you wish to reg-
ister the handset is being used to make a
call.
– Press any key to cancel automatic registra-
tion.
– If automatic registration does not work,
you will have to register the handset manu-
ally.
– You can change the name of the handset
