57
Connecting the base station to the PABX
Gigaset S440-445 / IM-engl / A31008-M1635-A661-1-7619 / pabx.fm / 07.06.2005
Setting pauses
Changing pause after line seizure
You can change the length of pause that is
inserted between pressing the talk key
c
and sending the number.
v
Open menu.
5 4 O 1 L
Press keys.
~
Enter digit for the pause
length (
1
= 1 sec.;
2
= 3 sec.;
3
= 7 sec) and press
§OK§
.
Changing the pause after the recall key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
v
Open
menu.
5 4 O 1 2
Press keys.
~
Enter a digit for the length of
the pause (
1
= 800 ms;
2
= 1600 ms;
3
= 3200 ms)
and press
§OK§
.
Changing a dialling pause
(pause after access code)
Requirement:
You have saved an access
v
Open
menu.
5 4 O 1 1
Press keys.
~
Enter a digit for the length
of the pause (
1
= 1 sec.;
2
= 2 sec.;
3
= 3 sec.;
4
= 6 sec.) and press
§OK§
.
Switching temporarily to
tone dialling (DTMF)
If your PABX works with dial pulsing (DP),
but you need tone dialling for a call
(e.g. to listen to a T-Net box), you must
switch to tone dialling for the call.
Requirement:
You are conducting a call
or have already dialled an external
number.
v
Open
menu.
Tone Dialing
Select and press
§OK§
.
Tone dialling is now activated
for this call only
.
