126
Appendix
Gigaset S675 IP / IM-NORD EN / A31008-M1915-R201-1-PG19 / appendix.fm / 6.8.07
Ve
rs
ion 4,
16
.09.
2005
General specifications
Icons
This section explains the meaning of cer-
tain icons and typographical conventions
that are used in this user guide.
Copy Entry
/
Copy List
(example)
Select one of the two specified
menu functions.
~
Enter digits or letters.
§Save§
The display keys' current func-
tions are shown reverse high-
lighted in the bottom display
line. Press the display key
below to launch the function.
q
Press the control key at the top
or bottom: scroll up or down.
r
Press the control key on the
right or left: e.g. select setting.
c
/
Q
/
*
etc.
Press the matching key on the
handset.
Example of a menu input
The steps you need to perform are shown
in abbreviated form in the user guide. This
is illustrated below using the example of
"Setting the contrast for the display". The
things you have to do are explained in the
boxes.
Interfaces
Fixed line network,
Ethernet
No. of channels
60 duplex channels
Radio frequency
range
1880 – 1900 MHz
Duplex method
Time multiplex,
10 ms frame length
Channel grid
1728 kHz
Bit rate
1152 kbit/s
Modulation
GFSK
Language code
32 kbit/s
Transmission
power
10 mW, average power
per channel
Range
up to 300 m outdoors,
up to 50 m indoors
Base station power
supply
230 V ~/50 Hz
Environmental
conditions in
operation
+5°C to +45°C;
20% to 75% relative
humidity
Codecs
G.711, G.726, G.729AB
with VAD/CNG, G.722
Quality of Service
TOS, DiffServ
Protocols
DECT, GAP, SIP, RTP, DHCP,
NAT Traversal (STUN),
HTTP
v
¢
Ð
¢
Display
¤
With the handset in idle status, press
on the right of the control key to open
the main menu.
¤
Use the control key to select the icon
Ð
(
Settings
)
– to do this, press up,
down, right and left
q
/
r
on the
control key until the icon has been
selected.
Settings
appears in the display header.
¤
Press the display key
§OK§
to confirm the
selection.
The
Settings
submenu is displayed.
¤
Press up or down on the control key
repeatedly until the
Display
menu func-
tion is selected.
¤
Press the display key
§OK§
to confirm the
selection.
Contrast
Select and press
§OK§
.
¤
Press down on the control key repeat-
edly until the
Contrast
menu function is
selected.
¤
Press the display key
§OK§
or on the right
of the control key to confirm your
selection.