background image

87

Making VoIP settings

Gigaset S675 IP / IM-NORD EN / A31008-M1915-R201-1-PG19 / settings_bs_hs_pabx.fm / 6.8.07

Ve

rs

ion 4,

 16

.09.

2005

Changing settings without the
connection assistant

You can change your provider's VoIP set-

tings and the VoIP user data via the menu 

without starting the connection assistant.

Downloading your VoIP provider's 

settings

The general settings for various VoIP pro-

viders are available for download on the 

Internet. The relevant Web page is precon-

figured in your phone.

Precondition:

 Your phone is connected to 

the Internet.

v

 

¢

Ð

 

¢

Telephony  

¢

VoIP

 

~

Enter the system PIN and press 

§OK§

Select Provider

Select and press 

§OK§

The phone establishes a connection to the 

Internet.

q

Select country and press 

§OK§

q

Select your VoIP provider and 

press 

§OK§

Your VoIP provider data is downloaded 

and saved in your phone.

Automatic update for the VoIP provider 

settings 

After the first download of the VoIP 

provider settings, your phone will check 

daily whether a newer version of the file 

for your VoIP provider is available via the 

Internet on the Siemens configuration 

server. If this is the case, the message 

New 

profile  available

 will be displayed when the 

handset is in idle status, and the message 

key 

flashes.

Press the message key.

§Yes§

Press the display key to con-

firm the prompt. 

~

Enter the system PIN and press 

§OK§

The new data for your VoIP provider will be 

downloaded and saved on the phone. 

Entering/changing VoIP user data

The VoIP settings must also be extended 

for your personal data. You will receive all 

necessary data from your VoIP provider.

v

 

¢

Ð

 

¢

Telephony 

¢

VoIP

 (Enter 

system PIN)

 

¢

Provider Registr.  

¤

Change multiple line input:

Username: 

Enter the user name (caller ID) for your 

VoIP provider account. 

Username

 is 

often identical to your Internet tele-

phone number (the first part of your 

SIP address, see page 98)

Please note:

– If an error occurs during the download, an 

error message will be displayed. You can 

find possible messages and measures in the 

table on page 118. 

– You can make and adapt the general set-

tings for your VoIP provider manually via 

your phone's Web configurator, see 

page 97.

Please note: 

– If you reply to the prompt with 

§No§

, the dis-

play will not be repeated. The message 

New 

profile available

 will only be shown again if a 

newer version of the VoIP settings than the 

one rejected is available. 

– You can deactivate the automatic version 

check via the Web configurator (page 115). 

Please note:

When making these entries, please remember 

the VoIP user data is case sensitive. To enter 

text see page 127.

Summary of Contents for Gigaset S675IP





































































































































































Reviews: