77
Connecting the base to the PABX
Gigaset S800-S800A / en Großbritannien / A31008-M2125-L101-1-7619 / pabx.fm / 20.05.2010
V
e
rsion 4.1, 21
.11.2007
Setting pauses
Changing the pause after line
seizure
You can change the length of the pause that
is inserted between pressing the talk key
c
and sending the number.
v
Open the main menu.
*#Q5#
L
Press keys.
~
Enter number for the length of
the pause (
1
= 1 sec.;
2
= 3 secs.;
3
= 7 secs.) and press
§OK§
.
Change pause after recall key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
v
Open the main menu.
*#Q5#
2
Press keys.
~
Enter a number for the length of
the pause (
1
= 800 ms;
2
= 1600 ms;
3
= 3200 ms) and
press
§OK§
.
Changing a dialling pause (pause
after access code)
You have saved an access code
v
Open the main menu.
*#Q5#
Press keys.
~
Enter number for the length of
the pause
(
1
= 1 sec.;
2
= 2 secs.;
3
= 3 secs.;
4
= 6 secs.)
and press
§OK§
.
To insert a dialling pause:
press and hold
S
for 2 seconds. A
P
appears in the dis-
play.
Switching temporarily to
tone dialling (DTMF)
If your PABX still operates with pulse dialling
(PD), but you need tone dialling for a con-
nection (e.g., to listen to the network mail-
box), you must switch to tone dialling for the
call.
Prerequisite:
You are conducting a call or
have already dialled an external number.
*
Press the star key.
After the call ends, pulse dialling is automat-
ically activated again.
