69
Handset settings
Gigaset S800-S800A / en Großbritannien / A31008-M2125-L101-1-7619 / registr_sett.fm / 20.05.2010
V
e
rsion 4.1, 21
.11.2007
Selection :
Select screensaver
or
§View§
Press the display key. The active
screensaver is displayed.
s
Select screensaver and press
§OK§
.
§Save§
Press the display key.
Briefly
press the end call key
a
to return to
the idle display.
Setting large font
You can increase the font size of print and
symbols in call lists and in the directory to
improve readability. Only one entry is shown
at a time on the display instead of several
entries and names are abbreviated if neces-
sary.
v
¢
Ï
¢
D Keypad
¢
Large Font
§Change§
Press display key (
³
= on).
Setting the colour scheme
You can set the display to be shown in vari-
ous colour combinations.
v
¢
Ï
¢
D Keypad
¢
Colour Schemes
Select
Colour Scheme
(1 to 5) and press
§OK§
.
Setting the display Backlight
Depending on whether or not the handset is
in the base/charger, you can activate or
deactivate the backlight. If it is activated, the
display is permanently dimmed. If the back-
light is deactivated it is switched on by
pressing any key. In this case the pressed key
has no other function.
v
¢
Ï
¢
D Keypad
¢
Display Backlight
The current setting is displayed.
¤
You can enter data in the following fields:
In Charger
Select
On
or
Off
.
Out of Charger
Select
On
or
Off
.
§Save§
Press the display key.
Setting keypad illumination
The brightness of the keypad illumination
can be set to one of five levels.
v
¢
Ï
¢
D Keypad
¢
Keypad Illumination
The current setting is displayed.
¤
You can enter data in the following fields:
Brightness:
Select
1
(darkest) to
5
(brightest).
§Save§
Press the display key.
Please note
If the
analogue clock
has been set as the
screensaver, the
second hand
is shown
only when the handset is
in the base
.
Please note
With the
On
setting, the standby time
of the handset can be significantly
reduced.
•