34
Internet
Gigaset SE681 WiMAX / engbt / A31008-N923-R101-2x-7619 / Status_pages.fm / 27.3.08
Sc
hablone 2
007_
10_1
9
Internet
Status
>
Internet
The connection settings for your Gigaset SE681 WiMAX are displayed in the
Internet
submenu.
ì
If necessary, click on the
Refresh
button to refresh the data in the status display.
Connection status
The status of the radio connection with the WiMAX network
is displayed as follows:
u
connected
= The Gigaset SE681 WiMAX has established
a radio connection with a WiMAX network. You will see
the connection duration in brackets and in the format
ddd:hh:mm:ss (d=days, h=hours, m=minutes, s=sec-
onds).
u
disconnected
= The Gigaset SE681 WiMAX is trying to
establish a connection with a WiMAX network.
IP address
Subnet mask
For an existing Internet connection only:
Displays the public IP address and subnet mask via which
your Gigaset SE681 WiMAX establishes the connection
with the Internet.
MAC address
For an existing Internet connection only:
The MAC address uniquely identifies a network component
within a network, in this case the public MAC address of
your Gigaset SE681 WiMAX within the WiMAX network you
use.
Default gateway
For an existing Internet connection only:
Displays the gateway the Gigaset SE681 WiMAX uses for
connecting to the Internet.
DHCP server
IP address of the DHCP server with which the Gigaset SE681
WiMAX is connected. While the Gigaset SE681 WiMAX has
not been assigned an IP address by the WiMAX network,
the field stays empty.
Preferred DNS server
Alternate DNS server
For an existing Internet connection only:
Displays the domain name server the Gigaset SE681
WiMAX uses to convert names to IP addresses.
Address Translation
(NAT)
Displays whether NAT mode is activated on your Gigaset
SE681 WiMAX. NAT converts the internal IP addresses of
the PCs in your network to public IP addresses. This main-
tains the confidentiality of your internal IP addresses.
Summary of Contents for GIGASET SE681 WIMAX
Page 2: ......
