7
Preparing to use the telephone
SL 740/SL 745 / GBR / A3108-L740-B102-1-7619 / starting.fm / 28.09.2004
Opening the battery cover
1. Hold the handset with the keypad
facing down.
2. Place the thumb of the other hand on
the mirror near the loudspeaker (a) and
with the index finger of the same hand
press the grooved area on the
handset (b).
3. Lift the cover.
Placing the handset in the charger to
charge the battery
1. Plug the power supply unit into your
power socket.
2. Place the handset in the charger unit
with the
display up
.
The handset is already registered with the
base station. The screen shows
INT 1
. It has
internal number
1
and internal name
INT 1
.
You can change the name (p. 44).
If
Base Search
or
Please Register
appears in
the display, you will have to register the
handset manually (page 42). You can get
help from the table on page 58.
Now leave the handset in the charger for
the battery to charge.
Battery charging is indicated in the top
right of the display by changes in the level
indicator on the battery icon
=
. During
use, the battery symbol shows the battery
level (see page 1).
First charging and discharging of the
battery:
The battery charging status is correctly
displayed only after uninterrupted
charging
and
discharging.
For the initial charge we recommend
leaving the handset in the charger
continuously
for
five
hours. Then remove
the handset from the charger and do not
recharge it until the battery is completely
flat.
After initial charging
and
discharging, you
can replace your handset in the charger
after each call.
Please note:
u
You must always repeat this procedure
when you remove the battery from the
handset and replace it again.
u
The battery heats up during charging.
This is normal and not dangerous.
u
After a while the charge capacity of the
battery will decrease for technical
reasons.
Your telephone is now ready for use.
To correctly record the time of incoming
for example, you must now set the
date
and time
To register
additional handsets
, refer to
To ensure your Gigaset is always
completely up to date…
You can download firmware updates from
the Internet.
Do the following:
u
Use the data cable supplied with the
pack to connect the PC to the handset.
u
On the Internet, go to http://www.sie-
mens-mobile.com/gigasetsl740 and
click on the link "Service downloads".
u
Then load the firmware update to your
handset.
a
b
