27
SMS (text messages)
Gigaset SL740 / GBR / A3108-L740-B102-1-7619 / sms_neutral.fm / 28.09.2004
Notification by SMS
You can have an SMS notification sent to
any device with SMS functionality, e.g.
your mobile phone, about missed calls .
Precondition: The caller's number was
identified (CLI).
You first have to store the destination
number in your phone and select the
notify type (factory setting: Off).
Storing the notify number
v
¢
î
¢
SMS
¢
Settings
Notify Number
Select and press
OK
.
~
Enter the number the text
message is to be sent to.
©
Press the display key.
Save Entry
Select and press
OK
.
a
Press and hold
(idle status).
Setting the notify type
v
¢
î
¢
SMS
¢
Settings
Notify Type
Select and press
OK
.
r
In the
Missed Calls:
line,
activate
On
if a notification
SMS is to be sent.
Save
Press the display key.
a
Press and hold
(idle status).
SMS mailboxes
The telephone comes supplied with the
general mailbox
activated. The general
mailbox cannot be PIN protected. You can
add up to three
private mailboxes
to your
phone and protect them with a
PIN
. A
mailbox is identified by a name and a
"mailbox ID" (kind of extension number).
Please remember:
u
If you operate a number of devices
(base stations) with SMS functionality
on a single phone line, then each SMS
mailbox ID may only occur once. In this
case you must also change the preset
ID of the general mailbox ("0").
u
You can only use personal mailboxes if
your service provider supports this.
This is the case if the telephone
number of a (preset) SMS Centre is
preceded by a star (*).
u
If you have forgotten your PIN, you can
reset it by restoring the factory settings
of the base station. This will
delete all
messages from all mailboxes
.
Setting up and changing a personal
mailbox
v
¢
î
¢
SMS
¢
Settings
SMS Mailboxes
Select and press
OK
.
(
‰
= activated).
Mailbox 2
Select mailbox, e. g.
Mailbox 2
,
and press
OK
.
r
In the
On/Off:
line, activate or
deactivate the mailbox.
s
Scroll to the
ID:
line.
r
Select the mailbox ID (0–9).
Already assigned digits will
not be available.
s
Scroll to the
Protection:
line.
r
Activate/deactivate PIN
protection.
s
Scroll to the
PIN
line.
~
Enter 4-digit PIN if set.
Save
/
OK
Press (depending on the
operating situation).
a
Press and hold
(idle status).
Call Director :
f
Off
g
ID:
1
Protection:
Off
PIN
0000
Î
Save
