15
Date and Time
Gigaset SL 100 / SL 150 / IM_engl / A31008-L150-J102-1-7619 / TimeCalendar.fm / 26.08.2003
Date and Time
Setting the date and time
Correct date and time settings are essential if you want to know exactly when calls/mes-
sages (SL 150) were received. You can choose between 12-hour and 24-hour display
(factory setting) for the time (a.m. = 1st half of the day; p.m. = 2nd half of the day).
v
¢
Calendar/Clock
¢
Date/Time
If you have selected the 12-hour display, on the
Time:
line you can use the display key
am/pm
to toggle between
am
and
pm
.
Setting the alarm clock
Precondition:
You have set the date and time.
Activating and setting the alarm clock
v
¢
Calendar/Clock
¢
Alarm Clock
~
Entering the date: Enter the day/month/year in the
Date:
line.
s ~
Entering the time: Scroll to the
Time:
line and enter
the hours/minutes (4-digit)
.
s r
Selecting display mode: Scroll to the
Time Mode:
line and choose between 12-hour and 24-hour
mode.
[RRRRRRRRRRRRRRRRRRRRR]
Save
Now press the display key to confirm the entry.
r
Activating the alarm clock: In the line
Room M.:
select
On
.
s ~
Entering the alarm call: Scroll to the
Time:
line and
enter the hours/minutes (4-digit), e.g.
QM15
for "7:15 a.m.".
[RRRRRRRRRRRRRRRRRRRRR]
am/pm
If 12-hour mode is set:
Now press the display key to switch between
am
and
pm
.
[RRRRRRRRRRRRRRRRRRRRR]
Save
Now press the display key to confirm the entry.
a
Long
press (back to idle status). You will see the
¼
icon.
i
◆
The alarm will only ring if handset is in the idle status. There will be
no alarm ring with room monitor activated, during a call or automatic
last number redial.
◆
To find out how to set the wake-up volume and melody, turn to
