91
Connecting the base station to a PABX
Gigaset SL 100 / SL 150 / IM_engl / A31008-L150-J102-1-7619 / pabx.fm / 26.08.2003
Connecting the base station to a PABX
The following settings are only needed when your PABX requires them,
please refer to
the operating instructions for your PABX
.
Dialling modes and and recall
The current setting is indicated by
‰
.
1. Step 2: Changing the dialling mode
The following dialling modes can be set:
◆
Tone dialling (DTMF),
◆
Dial pulsing (DP).
v
¢
Base Settings
¢
Add. Features
¢
Dialling Mode
2. Step 2: Setting the recall
v
¢
Base Settings
¢
Add. Features
¢
Recall
Storing the access code (outside line code)
Precondition:
Your PABX requires you to enter an access code before the telephone
number when making an external call, e. g. "0".
v
¢
Base Settings
¢
Add. Features
¢
Access Code
The access code will be automatically inserted before any of the numbers chosen from
the calls /answering machine list.
i
You cannot send or receive text messages on PABXs that do not support
Calling Line Identification.
s
Select and confirm a dialling mode (highlighted
with
‰
).
a
Long
press (back to idle status).
OK
s
Select and confirm recall (highlighted with
‰
).
a
Long
press (back to idle status).
OK
~
Enter or change the access code (maximum 3 digits)
and press the display key.
Save Entry
Confirm. The entry is stored.
a
Long
press (back to idle status).
à
OK