57
Connecting the base station to the PABX
Gigaset SL785 / EN-US / A31008-M2009-R301-2-6019 / pabx.fm / 27.02.2009
Ve
rs
ion 4,
16
.09.
2005
Connecting the base station
to the PABX
The following settings are only necessary
when your PABX requires them; see the
PABX user guide.
Dialing modes and setting
Flash Duration
The current setting is indicated by
Ø
.
Changing the dialing mode
The following dialing modes can be
selected:
u
Touch-tone dialing (DTMF)
u
Pulse dialing
v
¢
Ï
¢
Telephony
¢
Dialing Mode
s
Select dialing mode and press
§Select§
(
Ø
= selected).
Setting Flash Duration
Your phone is preset at the factory for
operation on the main connection.
For operation on a PABX, you may have to
change this value. Please refer to the user
guide for your PABX.
v
¢
Ï
¢
Telephony
¢
Flash Duration
s
Select duration and press
§Select§
.
(
Ø
= set value). Possible val-
ues are: 80 ms, 100 ms,
120 ms, 180 ms, 250 ms,
300 ms, 600 ms, 800 ms.
Setting pauses
Changing pause after line seizure
You can change the length of the pause
inserted between pressing the Talk key
c
and sending the number.
v
Open the main menu.
*#Q5#
L
Press keys.
~
Enter digit for the pause
length (
1
= 1 sec.;
2
= 3 sec.;
3
= 7 sec.) and press
§OK§
.
Changing the pause after the Flash key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
v
Open the main menu.
*#Q5#
2
Press keys.
~
Enter a digit for the length of
the pause (
1
= 800 ms;
2
= 1600 ms;
3
= 3200 ms)
and press
§OK§
.
Switching temporarily to touch-
tone dialing (DTMF)
If your PABX still operates with pulse dial-
ing (DP), but you need touch-tone dialing
(DTMF) for a connection (e.g., to listen to
the network mailbox), you must switch to
touch-tone dialing for the call.
Requirement:
You are conducting a call
or have already dialed an external
number.
*
Press the Asterisk key.
After the call has ended, pulse dialing is
automatically reactivated.
