8
First steps
Gigaset SL910H / IM1 EN / A31008-M2370-R101-1-4N19 / starting.fm / 22.12.2011
V
e
rsion 4.
1,
21
.1
1.2
00
7
Inserting the battery and closing the battery cover
To
reopen the battery cover
to replace the battery:
¤
Insert your fingernail into the cavity on
the bottom of the battery cover and pull
the battery cover upwards.
¤
To
remove the battery
,
insert your fin-
gernail into the cavity on the casing and
pull the battery upwards.
Warning
Use only rechargeable batteries (
page 41) recommended by Gigaset Communications
GmbH, as doing otherwise could result in significant health risks and personal injury. For exam-
ple, the outer casing of the battery could be destroyed or the battery could explode. The phone
could also malfunction or be damaged as a result of using batteries that are not of the recom-
mended type.
¤
First insert battery with the contact
surface facing down
.
¤
Then press the battery downwards
until it clicks into place.
1
2
¤
First, align the protrusions on the side
of the battery cover with the notches
on the inside of the casing.
¤
Then press the cover until it clicks into
place.
1
2