34
Configuring the handset
Gigaset SL910H / IM1 EN / A31008-M2370-R101-1-4N19 / settings-pabx.fm / 22.12.2011
V
e
rsion 4.
1,
21
.1
1.2
00
7
Changing the display language
¤
In the
Settings
menu (
page 13), touch
[
°
Language and Location]
.
¤
Touch
’
next to
Display Language
.
¤
Select language (
Ø
= selected).
¤
Confirm with
è
.
¤
Back
with
‘
.
Configuring the keyboard/keypad
You can change the appearance and behaviour of the keypad shown in the display. The settings do
not correspond to the handset keys (
c v a
).
¤
In the
Settings
page 13), touch
[
g
Display and Keypad]
.
¤
Scroll to
Keypad
. You can
configure the following:
u
Key Tones
: Every time you touch a number, a confirmation tone is audible.
u
Key Vibration
: Every time you touch a number on the keypad, the handset vibrates.
u
Keypad with R/P
: With R you can insert a line interruption (recall), with P a dialling pause. You can
insert a "P" by pressing and holding the
:
key and an "R" by pressing and holding the
;
key.
u
Keypad w. Letters
: For dialling with letters – sometimes used for entering service numbers, for
example.
¤
You can use the button on the right to activate or deactivate the relevant function directly.
Setting the display
Setting the screensaver
In idle status, you can display a screen saver. The screensaver replaces the display screen when the
handset is in idle status. To display the idle display again,
briefly
press
a
or the display.
¤
In the
Settings
menu (
page 13), touch
[
g
Display and Keypad]
.
¤
Activate/deactivate the screensaver via the right button.
¤
Touch
’
next to
Selection
. Select the
screensaver.
¤
Touch
[
‰
Select]
.
Setting the display backlight
You can specify a particular period in idle status after which the display backlight should switch off.
If it does not switch off, the display is permanently dimmed.
The display backlight switches itself on as soon as the handset is moved.
¤
In the
Settings
menu (
page 13), touch
[
g
Display and Keypad]
.
¤
Using the right button, activate/deactivate the display backlight in the charger or outside the
charger.
¤
Touch the
’
next to
Backlight Timeout
. Select the off time.
Activating/deactivating auto answer
In the case of auto answer, the handset accepts an incoming call as soon as you take it from the
charger. In the same way, the connection ends when you place it in the charger.
¤
In the
Settings
menu (
page 13), touch
[
«
Telephony]
.
¤
Activate/deactivate the function
with the button to the right of
Auto Answer
.
Please note
u
The QuickDial number changes if you change the corresponding number in Contacts.
u
If you delete the number assigned to the QuickDial shortcut from Contacts, the QuickDial
icon is deleted from the configurable page without prompting.
Please note
The handset's standby time can be significantly reduced if the display backlight is activated.