22
Configuring the Gigaset USB Stick 108
Gigaset USB Stick 108 / englisch / A31008-M1038-R101-1-7619 / configuration.fm / 02.06.2005
Sc
hablone 2
004_
12_2
7
Activating security options
In the
Configuration
–
Security
tab, the default security mode is
Disabled
. You can use
this to register on all wireless networks which do not use encryption for data transfer.
If you would like to register on a wireless network where the registration is checked
and data transfer is encrypted, you must activate the security options of your
Gigaset USB Stick 108.
ì
Select the security mode in the
Security
pop-up window:
–
WPA-PSK
–
WEP
WPA-PSK
offers greater protection for your network than WEP. You should
therefore use
WPA-PSK
for registration if all components in your network support
this.
The following are available for networks with authentication servers:
–
WPA
If
WPA
is used for authentication in your network, you must select the parameters
according to the settings for the network. Contact your administrator.
A window opens to configure the mode.
