20
Configuring the Gigaset USB Stick 108
Gigaset USB Stick 108 / englisch / A31008-M1038-R101-1-7619 / configuration.fm / 02.06.2005
Sc
hablone 2
004_
12_2
7
Transmission mode
The Gigaset USB Stick 108 is designed to operate as per various WLAN standards. In
Infrastructure
mode, the transmission mode is determined by the Access Point and is
displayed in this field.
In
Ad Hoc
mode, you can perform the following settings:
ì
Select
802.11g
if the network environment uses this WLAN standard.
The maximum transmission rate possible is 54 Mbps.
Or
ì
Select
802.11g
if the network environment uses this WLAN standard.
The maximum transmission rate possible is limited to 11 Mbps.
Or
ì
Select
Mixed Mode
if the network environment uses both modes. Some of the
network adapters use Standard 802.11g, others Standard 802.11b.
The maximum transmission rate possible depends on the WLAN standard of the
connection partner in question.
Or
ì
Select
Super G
to double the transmission rate. This mode is based on the
802.11g
mode and enables a maximum transmission rate of 108 Mbps by bundling the
channels.
The default setting is
Super G
.
Notes:
u
Super G mode can only be used if the Access Point supports this transmission
mode. If this is not the case and you leave the Super G default setting, the
transmission mode actually supported by the Access Point is automatically used.
u
If not all components in your wireless network support Super G, this can reduce
the transmission rate for technical reasons.
u
Super G mode always uses channel 6. You cannot use Super G if this channel is
assigned to another network within the transmission range of your wireless
network.