en
26
Switching
the appliance on
Fig.
"
Press the On/Off button 2, the button is
lit. The temperature alarm is switched off
by pressing the alarm button 4. The
alarm display 5 lights up until
the appliance has reached the set
temperatures.
We recommend the medium setting.
Operating tips
■
The sides of the housing are
sometimes heated slightly. This
prevents condensation in the area of
the door seal.
■
If the freezer compartment door
cannot be immediately re-opened after
it has been closed, wait until the
resulting low pressure has equalised.
■
The refrigeration system may cause
several areas of the freezer shelves to
frost quickly. This does not affect
function or power consumption. The
appliance does not require defrosting
until the entire surface of the freezer
shelf is covered with more than 5 mm
of frost or ice.
Setting
the temperature
Fig.
"
Set the temperature controller 1 to
a number with a coin. The higher
the number, the lower the temperature.
Alarm function
Temperature alarm
The temperature alarm switches on
if the freezer compartment is too warm
and the frozen food is at risk of thawing.
The alarm may switch on without any
risk to the frozen food:
■
when the appliance is switched on,
■
when large quantities of fresh food are
placed in the appliance,
■
if the freezer compartment door is
open too long.
Note
Do not refreeze thawing or thawed food.
Only ready meals (boiled or fried) may
be refrozen.
No longer store the frozen produce for
the max. storage period.
Alarm display
Fig.
"
The alarm display 5 lights up if
the freezer compartment becomes too
warm. Frozen food is at risk of thawing.
Switching off the alarm
Fig.
"
Press the alarm button 4 to switch off
the warning signal.
4
Alarm button
Used to switch off the warning
signal, see chapter “Alarm
function”.
5
Alarm display
Lights up if the freezer
compartment becomes too warm.
It goes out when the freezer
compartment has reached the set
temperature.
