6
Basic settings
Checking signaling method set
Lift the handset ;you will hear a dial tone.
Dial any digit
e.g. 5
When you no longer hear a dial tone,
the signaling method is set correctly.
Go on to the next page.
If you still hear the dial tone, this means that you must set the
signaling method (see below)
Replace the handset.
Notes:
If the telephone is operated in a home telephone system (PABX), you may not
hear a dial tone when you lift the handset. In this case, dial the code of an
internal party. If you hear a ringing signal, the signaling method is set
correctly.
Setting the signaling method
If the signaling method is not set correctly, you must reset it:
Lift the handset.
Press the SET key and…
Then the # key,
Followed by 1 for pulse dialing or 2 for DTMF.
Press the SET key to save the value
Replace the handset.