Cleaning and servicing
en
15
Display
Basic setting
Selection
Waiting time until a setting is applied
= 3 seconds
1
= 6 seconds
= 10 seconds
Childproof lock can be adjusted
= no
= yes
1
1
Factory setting (may vary according to model)
12.2 Changing basic settings
Requirement:
The appliance is switched off.
1.
Press and hold the button for approximately
four seconds.
a
The first basic setting appears in the display,
e.g. .
2.
Use the or button to change the setting.
3.
Use the button to switch to the next basic setting.
4.
To save the changes, press and hold the button
for approx. four seconds.
Note:
Following a power failure, the factory basic set-
tings are restored.
12.3 Discarding changes to the basic
settings
▶
Turn the function selector.
a
All changes are discarded and not saved.
13
Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
13.1 Cleaning products
In order to avoid damaging the various oven surfaces
on the appliance, do not use unsuitable cleaning
products.
WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.
▶
Do not use steam- or high-pressure cleaners to
clean the appliance.
ATTENTION!
Unsuitable cleaning products may damage the sur-
faces of the appliance.
▶
Do not use harsh or abrasive cleaning products.
▶
Do not use cleaning products with a high alcohol
content.
▶
Do not use hard scouring pads or cleaning
sponges.
▶
Do not use any special cleaners for cleaning the ap-
pliance while it is hot.
Using oven cleaner in a hot cooking compartment
damages the enamel.
▶
Never use oven cleaner in the cooking compartment
when it is still warm.
▶
Remove all food remnants from the cooking com-
partment and the appliance door before you next
heat up the appliance.
New sponge cloths contain residues from production.
▶
Wash new sponge cloths thoroughly before use.
Suitable cleaning agents
Only use cleaning agents that are suitable for the differ-
ent surfaces on your appliance.
Follow the instructions on cleaning the appliance.
"Cleaning the appliance", Page 16
Appliance front
Surface
Suitable cleaning agents Information
Stainless steel
¡
Hot soapy water
¡
Special stainless steel
cleaning products
suitable for hot sur-
faces
To prevent corrosion, remove any limescale, grease, starch or albu-
min (e.g. egg white) stains on stainless steel fronts immediately.
Apply a thin layer of the stainless steel cleaning product with a soft
cloth.
Plastic or painted
surfaces
E.g. control panel
¡
Hot soapy water
Do not use glass cleaner or a glass scraper.
Appliance door
Area
Suitable cleaning agents Information
Glass panels on
oven door
¡
Hot soapy water
Do not use a glass scraper or a stainless steel wool.
Tip:
Remove the door panels in order to clean them thoroughly.
