Siemens HB43.S SERIES, Instruction Manual

8

End time

The oven allows you to set the time when you want the food 

ready. The oven switches on automatically and switches off at 

the set time. E.g. the food may be placed in the oven in the 

morning and the oven set so that it is ready at midday.
Please ensure that the food will not go off if it is in the oven for 

too long.
Example in the picture: It is now 10:30 AM, the cooking time is 

45 minutes and the oven should switch off at 12:30 PM.

1.

Set the function control knob.

2.

Set the temperature control knob.

3.

Press the 

0

 button twice.

4.

Set the cooking time with the 

@

 or 

A

 buttons.

5.

Press the 

0

 button.

The arrow 

N

 is located in front of the 

y

. The time the dish 

will be ready is displayed.

6.

Delay the end time using the buttons 

@

 or 

A

.

The oven displays the programmed time after a few seconds 

and is set to standby. The time when the dish will be ready is 

displayed and the arrow 

N

 is shown in front of the 

y

 symbol. 

The symbols 

V

 and 

0

 turn off. When the oven is turned on, 

the cooking time progress is displayed and the arrow 

N

 is in 

front of the symbol 

x

. The symbol 

y

 switches off.

The cooking time has finished

A beep will sound. The oven will stop heating. The display 

panel will show 

‹

:

‹‹

. Press the 

0

 button. Programme a new 

cooking time with the 

@

 or 

A

 buttons. Or press the 

0

 button 

twice and turn the function control knob to the zero setting. The 

oven is off.

Changing the end time

Change the end time using the buttons 

@

 or 

A

. The new time is 

shown after a few seconds. If the timer has been programmed, 

first press the 

0

button twice. Do not change the end time if the 

cooking time has already started to count down. The final result 

may not be the same.

Cancelling the end time

Reset the end time to the current time by pressing 

A

. The new 

time is shown after a few seconds. The oven switches on. If the 

timer has been programmed, first press the 

0

 button twice.

Viewing the time settings

If several time functions are programmed, the corresponding 

symbols light up on the display panel. The arrow 

N

 symbol is in 

front of the time function in the foreground.
To view the timer 

V

, the cooking time 

x

, the end time  

y

 or 

the actual time 

0

, press the button 

0

 repeatedly until the 

arrow 

N

 reaches the required symbol. The corresponding value 

will be shown for a few seconds on the display panel.

Time

Once the oven has been connected or after a power cut, a 

flashing 

0

 symbol and three zeros are shown on the display 

panel. Set the time.

1.

Press the 

0

 button.

The display panel displays the time 

‚ƒ

.

‹‹

.

2.

Set the time with the buttons 

@

 or 

A

.

The programmed time is displayed after a few seconds.

Changing the time

No other time function can be programmed.

1.

Press the 

0

 button four times.

On the display, the time symbols light up, the arrow 

N

 is in 

front of the 

0

.

2.

Adjust the time with the buttons 

@

 or 

A

.

The programmed time is displayed after a few seconds.

Hiding the clock

You can hide the clock. For more information, please refer to 

the section 

Changing the basic settings

.

Childproof lock

The oven includes a childproof lock to prevent it being turned 

on accidentally.
The oven does not react to any setting. The timer and time can 

be programmed when the childproof lock is on.
When the heating type and temperature or grill level are 

programmed, the childproof lock turns off the heating.

Activating the childproof lock

No cooking time or end time should already be set.
Press the 

h

 button for approximately four seconds.

The display panel shows the 

@

 symbol. The childproof lock is 

now activated.

Turning off the childproof lock

Press the 

h

 button for approximately four seconds.

The 

@

 symbol on the display panel goes off. The childproof 

lock is now deactivated.