en
Basic operation
10
Type of heat-
ing
3D hot air
Temperature
Maximum
Cooking time
1 hour
5.
Switch off the appliance after the specified cooking
time.
6.
Wait until the cooking compartment has cooled
down.
7.
Clean the smooth surfaces with soapy water and a
dish cloth.
8.
Clean the accessories using soapy water and a dish
cloth or soft brush.
7
Basic operation
You can find out everything you need to know about
operating your appliance here.
7.1 Switching on the appliance
▶
Turn the function selector to any position other than
the "Off" position .
a
The appliance is switched on.
7.2 Switching off the appliance
▶
Turn the function selector to the "Off" position .
a
The appliance is switched off.
7.3 Setting the type of heating and
temperature
1.
Use the function selector to set the type of heating.
2.
Use the temperature selector to set the temperature
or grill setting.
a
The appliance starts heating after a few seconds.
3.
When your food is ready, switch off the appliance.
Tip:
The most suitable type of heating for your food
can be found in the description of the type of heating.
"Types of heating and functions", Page 6
Changing the type of heating
You can change the type of heating at any time.
▶
Use the function selector to set the required type of
heating.
Changing the temperature
You can change the temperature at any time.
▶
Use the temperature selector to set the required
temperature.
8
Rapid heating
To save time, you can use rapid heat-up to shorten the
preheat time.
Only use rapid heat-up when a temperature of over
100 °C has been set.
After rapid heat-up, it is best to use the following types
of heating:
¡
3D hot air
8.1 Setting rapid heating
To ensure an even cooking result, do not place the
food in the cooking compartment until rapid heating
has come to an end.
1.
Use the function selector to select rapid heating .
2.
Use the temperature selector to set the required
temperature.
a
Rapid heating starts after a few seconds.
a
When the rapid heating process ends, an audible
signal sounds and the heating indicator goes out.
3.
Use the function selector to set a suitable type of
heating.
4.
Place the food in the cooking compartment.
9
Time-setting options
Your appliance has different time-setting options, with
which you can control its operation.
9.1 Overview of the time-setting options
With the
button, select the different time-setting op-
tions.
Time-setting
option
Use
Timer
The timer can be set independently
of the appliance when it is in opera-
tion. It does not affect the appliance.
Time-setting
option
Use
Cooking time
If you set a cooking time, operation
of the appliance stops automatically
once this time has elapsed.
End time
For the cooking time, you can set the
time at which operation ends. The
appliance starts up automatically so
that it finishes cooking at the re-
quired time.
Time
You can set the time.
