en
Dishes
24
P
Dishes
Dishes
You can use the "Dishes" operating mode to prepare a
wide variety of food. The appliance selects most
settings for you.
Information about the programs
■
The cooking result depends on the quality of the
food and the type of cookware. For an optimal
cooking result, use food that is in good condition
and chilled meat only.
■
The appliance chooses the optimal heating mode
and the time and temperature setting for you. You
will only be asked to enter the weight. It is not
possible to set weights outside of the intended
weight range.
■
When roasting dishes for which the appliance will
apply the temperature selection for you,
temperatures of up to 300 °C can be saved.
Therefore, make sure that you use cookware that is
sufficiently heat resistant.
■
Information is provided, e.g. on cookware, shelf
position or the addition of liquid when cooking meat.
Some food requires turning or stirring, etc., during
cooking. This is shown on the display shortly after
operation starts. An audible signal will remind you at
the right time.
■
Information on the right kind of cookware to use and
tips and tricks for the preparation can be found at
the end of the instruction manual.
Selecting and setting food
1.
Press the menu button.
2.
Use the rotary selector to select "Dishes".
3.
Touch the arrow
¿
.
The first dish appears, along with a default value for
the weight.
4.
Use the rotary selector to select the required food.
5.
Touch the arrow
¿
.
You will be guided through the entire setting process for
your chosen food. Always touch the arrow
¿
.
Once you have implemented all the settings, start by
pressing the "Start/stop" button.
Notes
■
The appliance informs you if the cooking
compartment is still too hot for your chosen food.
■
If you press the "Start/stop" button during operation,
the set mode pauses. None of the settings can be
changed. Press the "Start/stop" button to resume
operation.
The program has ended
An audible signal sounds. The oven stops heating. You
can cancel the audible signal early using the
0
button.
If you are not satisfied with the cooking result, you can
increase the cooking time again. Touch the "Extend
cooking time" field. A cooking time is suggested. You
can change this if you wish.
If you are satisfied with the cooking result, touch
"Finish". "Enjoy your meal" appears on the display.
Cancelling the program
Press the "On/off" button. All settings are deleted. You
can implement new settings.
Setting a later end time
For some dishes, it is possible to set a later end time.
Refer to the time-setting options.
Once you have set an end time, the display shows the
waiting time. The status bar shows the time at which
operation is to start. None of the settings can be
changed. Please remember that easily spoiled foods
must not be allowed to remain in the cooking
compartment for too long.
