Sabbath mode
en
15
13 Sabbath mode
You can set a cooking time of up to 74 hours using
Sabbath mode. You can use top/bottom heating to
keep food warm between 85 °C and 140 °C during
this time without having to switch the appliance on or
off.
13.1 Starting Sabbath mode
Notes
¡
If you open the appliance door during operation, the
appliance stops heating. When you close the appli-
ance door, the appliance continues to heat again.
¡
Once it has started, you can no longer change or in-
terrupt Sabbath mode.
Requirement:
Sabbath mode is activated in the basic
settings.
→
1.
Use the rotary selector to set the Sabbath mode
type of heating .
2.
Press the temperature.
The temperature is preset to 85 °C.
3.
Use the rotary selector to set the desired temperat-
ure.
4.
Press .
The time is preset to 25 hours.
5.
Use the rotary selector to set the cooking time.
The end time cannot be delayed.
6.
Press
to start the operation.
a
The appliance starts to heat and the time starts to
count down.
7.
Once the cooking time has elapsed, an audible sig-
nal sounds. A note appears on the display confirm-
ing that the operation has finished. The appliance
stops heating up and responds again as usual out-
side of Sabbath mode.
‒
Press
to switch the appliance off.
The appliance automatically switches off after ap-
prox. 10 to 20 minutes.
14 Home Connect
This appliance is network-capable. Connecting your ap-
pliance to a mobile device lets you control its functions
via the Home Connect app, adjust its basic settings
and monitor its operating status.
The Home Connect services are not available in every
country. The availability of the Home Connect function
depends on the availability of Home Connect services
in your country. You can find information about this at:
www.home-connect.com.
The Home Connect app guides you through the entire
login process. Follow the instructions in the Home Con-
nect app to configure the settings.
Tips
¡
Please consult the documents supplied by
Home Connect.
¡
Please also follow the instructions in the Home Con-
nect app.
Notes
¡
Please note the safety precautions in this instruction
manual and make sure that they are also observed
when operating the appliance via the Home Con-
nect app.
→
¡
Operating the appliance on the appliance itself al-
ways takes priority. During this time it is not possible
to operate the appliance using the Home Connect
app.
¡
In networked standby mode, the appliance requires
a maximum of 2 W.
14.1 Setting up Home Connect
Requirements
¡
The appliance is connected to the power supply and
is switched on.
¡
You have a smartphone or tablet with a current ver-
sion of the iOS or Android operating system.
¡
The smartphone and the appliance are within range
of your home network's Wi-Fi signal.
1.
Download the Home Connect app.
2.
Open the Home Connect app and scan the follow-
ing QR code.
3.
Follow the instructions in the Home Connect app.
14.2 Home Connect Settings
You can adjust the settings and network settings for Home Connect by going to your appliance's basic settings.
Which settings the display shows will depend on whether Home Connect has been set up and whether the appliance
is connected to your home network.
