Siemens HB73GB550, Instruction Manual

11

Changing the cooking time

Use the 

@

 or 

A

 button to change the cooking time. After a few 

seconds, the change is adopted. If the timer has been set, 

press the 

0

 button beforehand.

Cancelling the cooking time

Use the 

A

 button to reset the cooking time to 0:00. After a few 

seconds, the change is adopted. The cooking time is 

cancelled. If the timer has been set, press the 

0

 button 

beforehand.

Checking the time settings

If several time-setting options are set, the relevant symbols are 

illuminated on the display. The time-setting options symbol is in 

the foreground and preceded by the 

N

 arrow.

To call up the 

V

 timer, 

x

 cooking time, 

y

 end time or 

0

clock, press the 

0

 button repeatedly until the 

N

 arrow is next 

to the relevant symbol. The display shows the value for a few 

seconds.

End time

You can change the time at which you wish your dish to be 

ready. The oven starts automatically and finishes at the desired 

time. You can, for example, put your dish in the cooking 

compartment in the morning and set the cooking time so that it 

is ready at lunch time.
Ensure that food is not left in the cooking compartment for too 

long as it may spoil.
Example in the picture: it is 10:30 am, the cooking time is 

45 minutes and the oven is required to finish cooking at 

12:30 pm.

1.

Adjust the function selector.

2.

Set the temperature selector.

3.

Press the 

0

 button twice.

4.

Use the 

@

 or 

A

 button to set the cooking time.

5.

Press the 

0

 button.

The 

N

 arrow is next to 

y

. The time when the dish will be 

ready is displayed.

6.

Use the 

@

 or 

A

 button to set a later end time.

After a few seconds, the oven adopts the settings and switches 

to standby position. The display shows the time at which the 

dish will be ready and the 

N

 arrow is next to the 

y

 symbol. 

The 

V

 and 

0

 symbols go out. When the oven starts, the 

cooking time counts down in the display and the 

N

 arrow is 

next to the 

x

 symbol. The 

y

 symbol goes out.

The cooking time has elapsed

A signal sounds. The oven stops heating. 0:00 is shown in the 

display. Press the 

0

 button. You can set a new cooking time 

using the 

@

 or 

A

 button. Or press the 

0

 button twice and turn 

the function selector to the off position. The oven switches off.

Changing the end time

Use the 

@

 or 

A

 button to change the end time. After a few 

seconds, the change is adopted. If the timer has been set, first 

press the 

0

 button twice. Do not change the end time if the 

cooking time has already started to elapse. The cooking result 

would no longer be correct.

Cancelling the end time

Use the 

A

 button to reset the end time to the current time. After 

a few seconds, the change is adopted. The oven starts. If the 

timer has been set, first press the 

0

 button twice.

Checking the time settings

If several time-setting options are set, the relevant symbols are 

illuminated on the display. The time-setting options symbol is in 

the foreground and preceded by the 

N

 arrow.

To call up the 

V

 timer, 

x

 cooking time, 

y

 end time or 

0

clock, press the 

0

 button repeatedly until the 

N

 arrow is next 

to the relevant symbol. The display shows the value for a few 

seconds.

Clock

After the appliance is connected or following a power cut, 

the 

0

 symbol and three zeros are lit in the display. Set the 

clock.

1.

Press the 

0

 button.

The time 12:00 is shown in the display.

2.

Use the 

@

 or 

A

 button to set the clock.

After a few seconds, the time that has been set is adopted.

Changing the clock

No other time-setting option should have been set.

1.

Press the 

0

 button four times.

The time symbols light up in the display and the 

N

 arrow is 

next to 

0

.

2.

Use the 

@

 or 

A

 button to change the clock.

After a few seconds, the time that has been set is adopted.

Hiding the clock

You can hide the clock. For more information, please refer to 

the section 

Changing the basic settings

.