Siemens HF35M562B, Instruction Manual

13

Technical data

Environmentally-friendly disposal

Dispose of packaging in an environmentally-friendly manner.

Automatic programmes

The automatic programmes enable you to prepare food very 

easily. You select the programme and enter the weight of your 

food. The automatic programme makes the optimum setting. 

You can choose from 9 programmes.

Setting a programme

Once you have selected a programme, set the oven as follows.

Example in the picture: programme 2 with a weight of 

1 kilogramme.

1.

Press the

Ž

 button.

Your appliance is ready for use.

2.

Press the

g

 button.

The first programme number appears in the display.

3.

Select the programme number with the rotary selector.

4.

Press the

h

 button.

The display shows 0.50 kilogrammes as the suggested 

weight.

5.

Set the weight using the rotary selector.

6.

Press the start button.

The programme starts. The 

Nx

 cooking time counts down in 

the display.

The programme has ended

A signal sounds. The programme has finished, the appliance 

stops heating. Use the

Ž

 button to switch off the appliance 

or make new settings.

Cancelling the programme

Press the stop button twice or use the

Ž

 button to switch off 

the appliance.

Power supply

220-240 V, 50 Hz

Maximum total connected load 1180 W
Microwave power setting

1000 W (IEC 60705)

Microwave frequency

2450 MHz

Fuse

min. 10 A

Dimensions (HxWxD)

­

 appliance

45.4 x 59.5 x 56.3 cm

­

 cooking compartment

2242 x 430 x 345 mm

VDE approved

yes

CE mark

yes

This appliance complies with European Directive 

2002/96/EC on Waste Electrical and Electronic 

Equipment (WEEE). The directive gives a framework for 

the collection and recycling of old appliances, which is 

valid across the EU.

3

NJ 0

3

NJ 0

3

NJ 0

3

NJ 0