Parameters
60
Key
A programmable key can be assigned a function or a speed dial number.
Some keys have already been programmed, for example, with the func-
tions "Disconnect" or "Loudspeaker". You can use up to 17 keys depending
on the phone type. You can assign keys in the Selected_Dialing tab or the
Function Keys tab. Enter a speed dial number or select a function from the
drop-down list.
Key Material File Management
•
Write File: Send server certificate to telephone.
•
Delete File: Delete server certificate on the telephone.
Layer 2 Voice/Signaling
Voice connection and signaling with
Æ
Layer 2 support.
Layer 3 Voice/Signaling
•
You can only set this if
Æ
Layer 3 support is active (
Æ
QoS L2/L3). The
value describes the position in the
Æ
Layer 2 Priority value.
•
Possible values: 0 ... 63.
Layer 2 Default
The default is
Æ
Layer 2 support.
LAN/PC port mode
•
Specify the bandwidths you want the optiPoint phone to use. The nec-
essary value depends on the bandwidth supported by the switch or
router in the network.
•
You must restart the tool after making a change.
Language
Select your language in the drop-down list.
Bandwidth
Application
10 Mbps half dup
For 10-Mbit networks in half duplex mode.
10 Mbps full dup
For 100-Mbit networks in full-duplex mode.
100 Mbps half dup For 10-Mbit networks in half duplex
1
mode.
100 Mbps full dup
For 100-Mbit networks in full-duplex
2
mode.
Auto negation
