Siemens HK8Q3A150M, Instruction Manual

en

    Time-setting options

18

Example in the picture: The time is 10.30 a.m., a 

cooking time of 45 minutes has been set and you want 

the food to be ready at 12.30 p.m.

1.

Setting the heating function and temperature or 

setting

2.

Press the 

v

 button and use the 

A

 button or 

@

 to set 

the cooking time.

3.

Touch the 

v

 button again.

The end time 

y

 is highlighted in the display.

4.

Use the 

@

 or 

A

 button to delay the end time.

The appliance applies the settings after a few seconds. 

The end time is shown in the display. Once the 

appliance starts, the cooking time begins to count 

down.

The cooking time has elapsed

An audible signal will sound. The appliance will stop 

heating. The cooking time will be zero on the display.
Once the signal stops, you can touch the 

@

 button to 

set a new cooking time.
Once your food is cooked, turn the function selector to 

the "Off" position to switch the appliance off.

Changing and cancelling

You can use the 

A

 or 

@

 button to change the end time. 

After a few seconds, the change will be applied. The 

end time cannot be changed once the cooking time has 

already started to count down. Otherwise the cooking 

result would no longer be satisfactory.
To cancel, use the 

A

 button to set the end time all the 

way back to the current time plus the cooking time. The 

appliance will start to heat and the cooking time will 

start to count down.

Setting the timer

You can use the timer whether or not the appliance 

itself is in use. However, it is not possible to set a 

cooking time or end time.
The maximum time that can be set is 23 hours and 59 

minutes. Up to 10 minutes, the timer duration can be 

set in 30-second increments. Above 10 minutes, the 

time increments become longer the higher the value.
The timer duration will start at a different default value, 

depending on which button you touch first: 

5 minutes if you touch the 

A

 button and 10 minutes if 

you touch the 

@

 button.

1.

Touch the 

M

 button.

2.

Use the 

A

 or 

@

 button to set the timer duration.

After a few seconds, the timer duration will start to 

count down.

Tip: 

If the set timer duration is the duration for which 

you wish to cook your food, use the cooking time. The 

appliance will then switch off automatically when it has 

finished cooking.

The timer duration has elapsed

An audible signal will sound. The timer duration will be 

zero on the display.
Touch any button to switch off the timer.

Changing and cancelling

You can use the 

A

 or 

@

 button to change the timer 

duration at any time. After a few seconds, the change 

will be applied.
To cancel, use the 

A

 button to reset the timer duration 

all the way to zero. The timer is now switched off.

Setting the time

Once the appliance has been connected to the mains 

or following a power failure, the clock will flash on the 

display. Set the time.

The function selector must be set to the "Off" position.

1.

Use the 

A

 or 

@

 button to set the time.

The time will stop flashing.

2.

Confirm by pressing the 

v

 button.

The appliance will apply the time you have set.

Changing the time

You can change the time again when you need to, e.g. 

from summer to winter time.
To do this, when the appliance is switched off, touch the 

v

 button until the time flashes, and use the 

A

 or 

@

 button to change the time.