Siemens HK9R3A250M, Instruction Manual

en

    Trouble shooting

26

Fitting

1.

Hold the top glass panel firmly by the sides and slide 

it in towards the back at an angle. The panel must 

be inserted into the openings on the lower side. The 

smooth surface must face outwards, while the 

roughened side must be on the inside. (Fig. A).

2.

Place the cover on the top of the oven door and 

press in place. Make sure that the grooves along the 

sides lock into position.

3.

Refitting the oven door See the section 

Refitting the 

oven door

.

Do not use the oven again until the panels have been 

correctly fitted.

Additional door safety

When preparing meals with long cooking times, the 

oven door can reach very high temperatures.
Supervise small children and keep them away from the 

oven when the oven is in operation.
Additional safety devices have been fitted to prevent 

contact with the oven door. Always attach these safety 

devices when children could come near the oven.
You can purchase this optional accessory (11023590) 

from the after-sales service.

3

Trouble shooting

Trouble shooting

If a fault occurs, there is often a simple explanation. 

Before calling the after-sales service, please refer to the 

fault table and attempt to correct the fault yourself.

Rectifying faults yourself

You can often easily rectify technical faults with the 

appliance yourself.
If a dish does not turn out exactly as you wanted, you 

can find useful cooking tips and instructions at the end 

of this instruction manual. 

~

 "Tested for you in our 

cooking studio" on page 28

--------

:

Warning – Risk of injury! 

Incorrect repairs are dangerous. Do not attempt to 

repair the appliance yourself. Repairs must only be 

carried out by one of our trained after-sales engineers. If 

the appliance is defective, call the after-sales service.

:

Warning – Risk of electric shock! 

Incorrect repairs are dangerous. Repairs may only be 

carried out and damaged power cables replaced by 

one of our trained after-sales technicians. If the 

appliance is defective, unplug the appliance from the 

mains or switch off the circuit breaker in the fuse box. 

Contact the after-sales service.

Error messages on the display

If an error message with "

“

" appears on the display, 

e.g. 

“‹†

-

„ƒ

, touch the 

v

 button. This will reset the 

error message. Reset the time, if necessary.
If the fault was a one-off, you can continue to use your 

appliance as normal. If the error message appears 

again, call our after-sales service and quote the exact 

error message and the E no. of your appliance. 

~

 "Customer service" on page 27

$

Fault

Possible 

cause

Notes/remedy

The appliance is 

not working.

Defective cir-

cuit breaker.

Check the circuit breaker in the 

fuse box.

Power failure Check whether the kitchen light 

or other kitchen appliances are 

working.

The time is flash-

ing on the display.

Power failure. Reset the time.

The settings on 

the appliance 

cannot be config-

ured. A key sym-

bol has lit up on 

the display or 

†‘”“

.

The child-

proof lock is 

activated.

Deactivate the childproof lock by 

pressing and holding the button 

with the key symbol for approx. 4 

seconds.