en
Installation instructions
44
Meal
Accessory/cookware Shelf posi-
tion
Type of
heating
Temperature
in °C
Cooking
time,
minutes
Small cakes
Universal pan
3
150
1
25–35
Small cakes, 2 levels
Universal pan
+
Baking tray
3+1
150
1
25–35
Small cakes, 3 levels
2x
Baking tray
+
Universal pan
5+3+1
140
1
35–45
Hot water sponge cake
Springform cake tin,
diameter 26 cm
2
160–170
2
30–40
Hot water sponge cake
Springform cake tin,
diameter 26 cm
2
170
30–40
Hot water sponge cake, 2 levels
Springform cake tin,
diameter 26 cm
3+1
150–160
2
30–45
1
Preheat the appliance for 5 minutes. For appliances with the rapid heating function, do not use this function for
preheating.
2
Preheat the appliance. For appliances with the rapid heating function, do not use this function for preheating.
Grilling
Food
Accessories/cook-
ware
Shelf posi-
tion
Type of
heating
Temperature in
°C/grill setting
Cook-
ing time
in mins
Toasting bread
Wire rack
5
3
0.2–1.5
22 Installation instructions
The installation instructions contain instructions for
the gas connection and for the gas conversion's as-
sembly
.
Note:
For after-sales service only.
22.1 General information
Your appliance must only be converted from
one gas type to another by authorised per-
sonnel who have received appropriate train-
ing. The procedure must always be carried
out in accordance with the instructions in
this manual.
Incorrect connection and incorrect settings
may damage the appliance. The appliance
manufacturer shall accept no liability for in-
correct connections or incorrect settings.
¡
Wear protective gloves so that you do not
cut yourself. Accessible parts may have
sharp edges.
¡
Do not place the appliance behind a decor-
ative door or the door of a kitchen unit.
There is a risk of overheating.
¡
Never install the appliance in boats or in
vehicles.
¡
Always closely observe the symbols on the
rating plate. If there is no symbol that is rel-
evant to your country, comply with the tech-
nical guidelines in force in your country
when configuring the appliance settings.
¡
Find out which gas type and which gas
pressure your local gas supply network
uses before installing the appliance. Before
using the appliance, ensure that all settings
have been set correctly.
¡
Always comply with local and national
guidelines and regulations.
¡
The settings for configuring your appliance
can be found on the rating plate on the
rear of the appliance. The gas type set at
the factory is marked with an asterisk (*).