Siemens IQ300 WT45N202GB, Installation And Operating Instructions Manual

Installation and connection       

en

13

5

 Installation and 

connection

Installation and connection

Scope of delivery

■

Dryer

■

Installation and operating 

instructions

■

Basket for woollens

*

■

Condensation drain*

Installing and connecting the 

dryer

:

Warning

Risk of death!

There is a risk of electric shock as the 

dryer is operated with electricity.

■

Check the dryer for visible damage. 

You must not operate the dryer if it is 

damaged.

■

Before connecting the dryer to the 

power supply, ensure that the 

electric voltage specified on the 

rating plate matches the voltage of 

your socket.

■

Only use earth-leakage circuit 

breakers with the following symbol: 

z

.

■

Ensure that the mains cable is not 

kinked or trapped, and that it does 

not come into contact with heat 

sources or sharp edges.

:

Warning

Children may lock themselves in the 

dryer, putting their lives at risk!

Do not set up the dryer behind a door 

or sliding door, as this may obstruct the 

dryer door or prevent it from opening.

Caution!

Risk of injury

■

Due to the heavy weight of the dryer, 

you may injure yourself if you lift it. 

Do not lift the dryer on your own.

■

You could cut your hands on the 

sharp edges of the dryer. Do not 

hold the dryer by the sharp edges.

■

Protruding parts on the dryer may 

break off when it is lifted or pushed. 

Do not move the dryer by holding 

onto protruding parts.

Caution!

Risk of material damage to the dryer or 

fabrics.

■

Check the dryer for damage caused 

during transportation. Never operate 

a dryer if it is damaged.

■

Any residual water in the dryer may 

freeze and damage the dryer. Do not 

install the dryer in rooms that are at 

risk of frost.

During installation, ensure that:

■

The dryer is placed on a clean, level 

and firm surface,

■

The mains plug can be accessed at 

all times,

■

The air inlet on the dryer is kept clear 

and there is sufficient ventilation,

■

The area around the dryer is kept 

clean and

■

The dryer is levelled using the 

threaded feet. 

Note:  

Check the alignment of the 

appliance with a spirit level and 

correct if necessary. Change the 

height by turning the appliance feet.

All appliance feet must stand firmly 

on the ground.

Incorrect alignment may cause high 

noise levels, vibrations and improper 

movement of the drum.

Note:  

If in doubt, have the appliance 

connected by a specialist.

* Depending on the model