en
first time
26
2.
Set the slider to ON or OFF.
3.
Push in the top basket.
Cleaning glassZone
Limescale and soiling from the dish-
washing water can block the nozzles.
Note:
Always operate the appliance
with the glassZone fitted.
1.
Pull out the top basket.
2.
Pull the tab on the glassZone up
and forwards .
3.
Set the slider to ON.
4.
Clean under running water.
5.
Place the glassZone in the top
basket and lock in position .
Check that the mounts are in the
correct position.
a
The glassZone audibly clicks into
position .
6.
Push in the top basket.
first time
10 Before using for the
first time
first time
10.1 Performing initial start-
up
On initial start-up or after a reset to
the factory settings, you will need to
make settings. The display shows the
settings for initial start-up.
Tip:
Connect your appliance to a mo-
bile device. You can conveniently
change all settings via the
Home Connect app.
Requirement:
been installed and connected.
→
1.
2.
3.
Switch on the appliance.
a
The display shows the settings for
initial start-up.
4.
Press repeatedly until the display
shows the required setting.
Summary of Contents for iQ700 SX87Y801BE
Page 59: ......