en
22
Electrical connection
The socket must be near the appliance
and also freely accessible following
installation of the appliance.
The appliance complies with the
protection class I. Connect the appliance
to 220-240 V/50 Hz alternating current
via a correctly installed socket with
protective conductor. The socket must
be fused with a 10 to 16 A fuse.
For appliances operated in non-
European countries, check whether the
stated voltage and current type match
the values of your mains supply match
the values of the mains supply. This
information can be found on the rating
plate. Fig.
-
ã=
Warning
Never connect the appliance to
electronic energy saver plugs.
Our appliances can be used with mains
and sine-controlled inverters. Mains-
controlled inverters are used for
photovoltaic systems which are
connected directly to the national grid.
Sine-controlled inverters must be used
for isolated applications (e.g. on ships or
in mountain lodges) which are not
connected directly to the national grid.
Getting to know your
appliance
Please fold out the illustrated last page.
These operating instructions refer to
several models.
The features of the models may vary.
The diagrams may differ.
Fig.
1
* Not all models.
1-4
Controls/light
5
Light switch
6
Main On/Off switch
7
Glass shelf
8
Vegetable container
9
Butter and cheese compartment *
10
Egg rack
11
Shelf for tubes and small tins
12
Shelf for large bottles
Summary of Contents for KF R Series
Page 70: ...1 2 6 1 4 7 8 10 9 11 5 12 0 2 4 1 2 3 4 6 8 super C 3 ...
Page 71: ...3 4 5 6 7 8 A ...
Page 72: ...8 B 9 B A 0 2 3 4 6 8 super C ...
Page 73: ... ...
