en
25
Interior fittings
You can reposition the shelves inside the
appliance and the door shelves as
required:
■
Pull shelf forwards, lower and swing
out to the side. Fig.
4
■
Raise the door shelf and remove.
Fig.
5
Special features
(not all models)
Vario shelf
Fig.
6
To facilitate the storage of tall items
(e.g. cans or bottles), the front part of the
Vario shelf can be taken out and pushed
under the rear part.
Drawer for sausage and cheese
Fig.
7
The drawer can be removed for adding
and removing food. Lift the drawer and
pull out. The drawer holder can be
adjusted.
Bottle shelf
Fig.
8
A/B
Bottles can be stored securely on
the bottle shelf. The holder can be
adjusted.
Temperature and humidity regulator for
vegetable container
Fig.
9
For long-term storage of vegetables,
salads and fruit, slide the regulator all the
way to the right – ventilation opening is
open – temperature drops.
For short-term storage slide the regulator
to the left. Ventilation opening is closed –
high air humidity – temperature rises.
Bottle holder
Fig.
*
The bottle holder prevents bottles from
falling over when the door is opened
and closed.
Sticker “OK”
(not all models)
The “OK” temperature monitor can be
used to determine temperatures below
+4 °C. Gradually reduce the temperature
if the sticker does not indicate “OK”.
Note
When the appliance is switched on, it
may take 12 hours until the temperature
is reached.
Correct setting
Summary of Contents for KF R Series
Page 70: ...1 2 6 1 4 7 8 10 9 11 5 12 0 2 4 1 2 3 4 6 8 super C 3 ...
Page 71: ...3 4 5 6 7 8 A ...
Page 72: ...8 B 9 B A 0 2 3 4 6 8 super C ...
Page 73: ... ...
