en
Home Connect
20
¡
Operating the appliance on the ap-
pliance itself always takes priority.
During this time it is not possible
to operate the appliance using the
Home Connect app.
10.1 Connecting the appli-
ance to a WLAN home
network (Wi-Fi) with
WPS function
If your router has a WPS function,
you can connect the appliance to
your WLAN home network (Wi-Fi)
automatically.
1.
Press
.
a
The temperature display (refriger-
ator compartment) shows
.
2.
Press / (Refrigerator compart-
ment) repeatedly until the temper-
ature display (refrigerator compart-
ment) shows and the temperat-
ure display (freezer compartment)
shows .
3.
Press / (Freezer compartment).
a
The temperature display (freezer
compartment) shows an animation
for two minutes. The appliance is
ready for automatic connection to
the WLAN home network (Wi-Fi).
4.
Activate the WPS function on the
router during this period.
To do this, take note of the inform-
ation in the documents for your
router.
a
Once successfully connected,
flashes in the temperature dis-
play (freezer compartment).
5.
If the temperature indicator (freezer
compartment) shows , the appli-
ance was unable to establish a
connection to the WLAN home net-
work (Wi-Fi).
‒
Check whether the appliance is
located within the range of the
WLAN home network (Wi-Fi).
→
‒
Repeat the process or establish
the connection manually
→
6.
Connect the appliance to the
Home Connect app. →
10.2 Connecting the appli-
ance to a WLAN home
network (Wi-Fi) without
WPS function
If your router does not have a WPS
function, you can connect the appli-
ance to your WLAN home network
(Wi-Fi) manually. The appliance
briefly sets up its own WLAN net-
work. You can connect a mobile
device to the WLAN network and
transfer the network information for
the WLAN home network (Wi-Fi) to
your appliance.
Requirement:
The Home Con-
nect app has been installed on your
mobile device.
1.
Press
.
a
The temperature display (refriger-
ator compartment) shows
.
2.
Press / (Refrigerator compart-
ment) repeatedly until the temper-
ature display (refrigerator compart-
ment) shows
and the temperat-
ure display (freezer compartment)
shows .
3.
Press / (Freezer compartment).
a
The appliance now sets up its own
WLAN network with the network
name "HomeConnect".