en
29
Interior fittings
All variable parts of the appliance
can be taken out for cleaning.
Take out glass shelves
Fig.
'
To do this, pull out shelf, lift at the front
and take out.
Take out shelves in the door
Fig.
(
Lift shelves upwards and take out.
Condensation channel
Fig.
+
Regularly clean the condensation
channel and drainage hole with a cotton
bud or similar implement to ensure that
the condensation can drain.
Removing the container
Fig.
,
Pull out the container all the way, lift at
the front and remove.
Light (LED)
Your appliance features a maintenance-
free LED light.
These lights may be repaired
by customer service or authorised
technicians only.
Tips for saving energy
■
Install the appliance in a dry, well
ventilated room! The appliance should
not be installed in direct sunlight
or near a heat source (e.g. radiator,
cooker).
If required, use an insulating plate.
■
Allow warm food and drinks to cool
down before placing in the appliance.
■
Open the appliance as briefly as
possible.
■
To avoid increased power
consumption, occasionally clean the
back of the appliance.
■
If available:
Fit wall spacers to obtain the indicated
energy rating of the appliance (see
Installation instructions). A reduced
wall gap will not restrict the function
of the appliance. The energy rating
may then increase slightly. The gap
of 75 mm must not be exceeded.
■
The arrangement of the fittings does
not affect the energy rating of the
appliance.
Summary of Contents for KS**V SERIES
