background image

en

    Installation

14

Preparing the appliance

Exhaust-air mode

 

If the extractor hood is used in exhaust-air mode, a one-

way flap must be installed.

Note: 

The label or stamping on the one-way flap must 

face outwards.

1.

Click the two spigots on the one-way flap into place 

in the holes on the air outlet and/or on the air inlet.

2.

Check that the one-way flap is working correctly.

Air recirculation mode

 

If the extractor hood is used in circulating-air mode, the 

blow opening must be secured using a circulated air 

grille. The circulated air grille prevents mechanical and 

electrical hazards.

Rectangular air outlet

 

If the dust extractor hood has a rectangular air outlet, 

the air inlet provided must be screwed in tightly via the 

air outlet.

5

Installation

Installation

Final fitting stage

1.

Remove the metal grease filter.

2.

Establish the electrical connection.

3.

Push the extractor hood in the housing up until the 

mounting spring at the front and rear clicks into 

place.

4.

Screw the extractor hood in tightly.

5.

Insert and lock the metal grease filter.

Connecting the pipes

Note: 

If an aluminium pipe is used, smooth the area 

where it is to be connected before you connect it.

Exhaust air pipe, dia. 150 mm (recommended size)

Fit the exhaust air pipe directly to the air-pipe connector 

and seal the joint.

Exhaust air pipe, dia. 120 mm

1.

Fit the reducing connector directly to the air-pipe 

connector.

2.

Attach the exhaust air pipe to the reducing 

connector. 

3.

Seal both joints appropriately.

Summary of Contents for LB55565GB

















Reviews: