background image

3

Appliance description

Operating Instructions

Operating modes

Exhaust-air mode:

The extractor-hood fan extracts the kit-
chen vapours and conveys them through
the grease filter into the atmosphere.

The grease filter absorbs the solid 
particles in the kitchen vapours.

The kitchen is kept almost free of grease
and odours.

D

When the extractor hood is operated

in exhaust-air mode simultaneously with
a different burner which also makes use
of the same chimney 

(such as gas, oil or

coal-fired heaters, continuous-flow heaters,
hot-water boilers) care must be taken to

ensure that there is an adequate supply
of fresh air 

which will be needed by the

burner for combustion.

Safe operation is possible provided that the
underpressure in the room where the
burner is installed does not exceed 4 Pa
(0.04 mbar).

Operating modes

This can be achieved if combustion air can
flow through non-lockable openings, e.g. in
doors, windows and via the air-
intake/exhaust-air wall box or by other
technical measures, such as reciprocal
interlocking, etc.

If the air intake is inadequate, there is a
risk of poisoning from combustion gases
which are drawn back into the room.

An air-intake/exhaust-air wall box by itself is
no guarantee that the limiting value will not
be exceeded.

Note: When assessing the overall
requirement, the combined ventilation
system for the entire household must be
taken into consideration. This rule does not
apply to the use of cooking appliances,
such as hobs and ovens.

Unrestricted operation is possible if the
extractor hood is used in recirculating mode
– with activated carbon filter.

Circulating-air mode:

An activated carbon filter must be fitted
for this operating mode (see Filters and
maintenance).

The complete installation set and 

replacement filters can be obtained 

from 

specialist

outlets.

The corresponding accessory numbers
can be found at the end of these 
operating instructions.

The extractor-hood fan extracts the 
kitchen vapours which are purified in the
grease filter and activated carbon filter
and then conveyed back into the 
kitchen.

The grease filter absorbs the grease 
particles in the kitchen vapours.

The activated carbon filter binds the
odorous substances.

If no activated carbon filter is installed, 

it is not possible to bind the odorous 
substances in the cooking vapours.

Lighting

Light / fan

switches

Filter grille

Chimney
panelling

Summary of Contents for LC45 Series

















Reviews: