Siemens LC67KHM60, Instructions For Installation And Use Manual

  Cleaning and maintenance   

en

7

2

Cleaning and maintenance

Cleaning 

and maint

enance

:

Warning

Risk of burns!

The appliance becomes hot during operation. Allow the 

appliance to cool down before cleaning.

:

Warning

Risk of electric shock!

Penetrating moisture may result in an electric shock. 

Clean the appliance using a damp cloth only. Before 

cleaning, pull out the mains plug or switch off the circuit 

breaker in the fuse box.

:

Warning

Risk of electric shock!

Do not use any high-pressure cleaners or steam 

cleaners, which can result in an electric shock.

:

Warning

Risk of injury!

Components inside the appliance may have sharp 

edges. Wear protective gloves.

:

Warning

Risk of injury!

Risk of trapping body parts when opening and closing 

the glass front. Do not reach into the area behind the 

glass panel, and keep your fingers away from the 

hinges.

Cleaning agents

To ensure that the different surfaces are not damaged 

by using the wrong cleaning product, follow the 

instructions in the table. Do not use any of the following:

■

Harsh or abrasive cleaning agents, e.g. scouring 

powder or liquid scouring cleaner,

■

Cleaning products with a high alcohol content,

■

Hard scouring pads or cleaning sponges,

■

Pressure washers or steam cleaners,

■

Cleaning products that dissolve limescale,

■

Aggressive all-purpose cleaning products,

■

Oven spray.

Note: 

Wash new sponge cloths thoroughly before use.

Note: 

Follow all instructions and warnings included with 

the cleaning products.

--------

Removing metal grease filter

1.

Open the glass front fully.

2.

Open the lock and swing down the metal grease 

filter. When you do this, take hold of the metal 

grease filter from underneath with your other hand.

3.

Take the metal grease filter out of the holder.

Notes

– Fat may accumulate in the bottom of the metal 

grease filter.

– Hold the metal grease filter level to prevent 

grease from dripping out.

Area

Cleaning products

Stainless steel

Hot soapy water: 

Clean with a dish cloth and then dry with a 

soft cloth.
Clean stainless steel surfaces in the direction 

of the grain only.
Special stainless steel cleaning products are 

available from our after-sales service or from 

specialist retailers.Apply a very thin layer of 

the cleaning product with a soft cloth.

Painted surfaces

Hot soapy water: 

Clean using a damp dish cloth and then dry 

with a soft cloth.
Do not use stainless steel cleaner.

Aluminium and plastic Glass cleaner: 

Clean with a soft cloth.

Glass

Glass cleaner: 

Clean with a soft cloth. Do not use a glass 

scraper.

Controls

Hot soapy water: 

Clean using a damp dish cloth and then dry 

with a soft cloth.
Risk of electric shock caused by penetrating 

moisture.
Risk of damage to the electronics caused by 

penetrating moisture. Never clean controls 

with a wet cloth.
Do not use stainless steel cleaner.