9
Trouble shooting
Malfunctions often have simple explanations. Please read the
following notes before calling the after-sales service.
:
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be carried
out and damaged power cables replaced by one of our trained
after-sales technicians. If the appliance is defective, unplug the
appliance from the mains or switch off the circuit breaker in the
fuse box. Contact the after-sales service.
LED lights
Defective LED lights may be replaced by the manufacturer, their
after-sales service or a qualified technician (electrician) only.
Fault table
--------
Replacing the batteries in the remote control
1.
Push in the lug.
2.
Remove the cover.
3.
Remove the batteries.
4.
Correctly insert the new batteries (AAA/LR03/1.5 V).
Note:
Dispose of flat or faulty batteries in accordance with local
regulations.
Note:
Do not dispose of batteries along with general household
waste.
Problem
Possible cause Solution
The appliance
does not work
The plug is not
plugged into the
mains
Connect the appliance to
the power supply
Power cut
Check whether other
kitchen appliances are
working
The fuse is
faulty
Check in the fuse box to
make sure that the fuse for
the appliance is in working
order
The lighting
does not work.
The LED lights
are defective.
Call the after-sales service.
The button
illumination
does not work.
The control unit
is faulty.
Call the after
sales service.
The F indicator
and button 1 or
the F indicator
and button 3/
&
light up.
The grease filter
or the activated
charcoal filter is
saturated.
Clean the filter or regener-
ate or replace the activated
charcoal filter; see the
Cleaning and maintenance
section.
