en
Operating the appliance
8
Controls
Control panel
Operating buttons
Indicators/symbols
Before using the appliance for the first time
Before you can use your new appliance, you must apply
certain settings.
Follow the instructions below before using the
appliance for the first time:
Notes
■
Thoroughly clean the appliance and accessories.
■
If your hob is a gas hob, fit the gas deflector to the
appliance. To do this, refer to the printed
supplement.
Initial use
Switching over the display for circulating-air mode
For circulating-air mode, the electronic controller
indicator must be switched over accordingly:
1.
Check whether the extractor hood is connected and
switched off.
2.
Press and hold the
@
button until
’
flashes twice on
the display panel.
This will switch the electronic controller over to
circulating-air mode.
Switching over the display for exhaust air mode
1.
Check whether the extractor hood is connected and
switched off.
2.
Press and hold the
@
button until
’
flashes once on
the display panel.
This will switch the electronic controller over to air
extraction mode.
Switching the appliance on and off
Note:
Before you switch on the appliance, open both
fan flaps by pressing on them lightly.
Note:
Always adjust the setting according to the current
conditions. To eliminate strong cooking smells, select a
high fan setting.
Button
Explanation
#
Switches the extractor hood on and off
x
Switches on the run-on function
A
Reduces the power level/resets the
metal grease filter and activated
charcoal filter saturation indicators
@
Increases the power level
Indicator/
symbol
Explanation
û
(
x
)*
Run-on function
û
(
!
)**
Metal grease filter saturation indicator
û
(
"
)**
Activated charcoal filter saturation
indicator
‚
Power level 1
ƒ
Power level 2
„
Power level 3
›
Intensive mode
*LED lights up next to the symbol in brackets
**LED lights up underneath the symbol in brackets
