background image

en

    Operating the appliance

6

1

Operating the appliance

Operating the appliance

These instructions apply to several appliance variants. 

It is possible that individual features are described 

which do not apply to your appliance.

Note: 

Switch on the extractor hood when you start 

cooking and switch it off again several minutes after you 

have finished cooking. This is the most effective way of 

removing the kitchen fumes.

Control panel model 1 and 2

Setting the fan

Switching on

Pull out the filter pull-out. The fan starts at the selected 

level.
Press buttons 1, 2 or 3 in order to change the fan 

strength.

Switching off

Slide the filter pull-out in as far as the limit stop.

Note: 

When you pull out the filter pull-out again, the fan 

starts up at the fan speed that was last selected.

Control panel model 3

Setting the fan

Switching on

Pull out the filter pull-out and press the 

#

 button. The 

fan starts at setting 2.
Press the + or - button to change the fan strength.

Switching off

Press the 

#

 button. Slide the filter pull-out in.

Intensive setting

You can use the intensive setting if there is a large 

build-up of odours and fumes/vapours.
Press the + button until all of the LEDs in the display 

light up. The intensive setting is activated. 
After approx. six minutes, the electronics automatically 

reduce the fan to a lower setting . If you want to end the 

intensive setting before the preset time expires, press 

the - button until the required fan setting is reached.
The run time is limited. The fan is then automatically 

reduced to a lower fan setting. You can switch back 

manually at any time.

Fan run-on time

If you slide in the filter pull-out, the run-on time will be 

activated for as long as the extractor hood is operating.
After approx. 10 minutes, the fan switches off 

automatically.

Lighting

The lighting can be switched on and off independently 

of the ventilation.
Press the 

A

 button.

Explanation

0, 

A

Light on/off

1

Fan speed 1

2

Fan speed 2

3

Fan speed 3

Explanation

<

Light on/off

#

Fan on/off

-

Reduces the fan speed

+

Increases the fan speeds/intensive setting

Summary of Contents for LI64MA530

















Reviews: