background image

Cleaning and servicing

 en

11

ATTENTION!

Unsuitable cleaning products may damage the sur-
faces of the appliance.

Do not use harsh or abrasive detergents.

Do not use cleaning products with a high alcohol
content.

Do not use hard scouring pads or cleaning
sponges.

Do not use any special cleaners for cleaning the ap-
pliance while it is hot.

Only use glass cleaners, glass scrapers or stainless
steel care products if recommended in the cleaning
instructions for the relevant part.

Wash sponge cloths thoroughly before use.

Cleaning the stainless steel surfaces

1.

Observe the information regarding the cleaning
agents. 
→ 

"Cleaning products", Page 10

2.

Clean using a sponge cloth and hot soapy water in
the direction of the finish.

3.

Dry with a soft cloth.

4.

Apply a thin layer of the stainless steel cleaning
product with a soft cloth.

Tip: 

You can obtain stainless steel cleaning products

from after-sales service or the online shop.

Cleaning painted surfaces

1.

Observe the information regarding the cleaning
agents. 
→ 

"Cleaning products", Page 10

2.

Clean using a sponge cloth and hot soapy water in
the direction of the finish.

3.

Dry with a soft cloth.

Cleaning plastic

1.

Observe the information regarding the cleaning
agents. 
→ 

"Cleaning products", Page 10

2.

Clean with a soft cloth and glass cleaner.

Cleaning glass

1.

Observe the information regarding the cleaning
agents. 
→ 

"Cleaning products", Page 10

2.

Clean with a soft cloth and glass cleaner.

Cleaning controls

WARNING ‒ Risk of electric shock!

Penetrating moisture may cause an electric shock.

Do not use wet sponge cloths.

1.

Observe the information regarding the cleaning
agents. 
→ 

"Cleaning products", Page 10

2.

Clean using a damp sponge cloth and hot soapy
water.

3.

Dry with a soft cloth.

Removing the grease filter

WARNING ‒ Risk of injury!

¡

The filter cover may swing out.

Open the filter cover slowly.

Take hold of the filter cover after opening until it
no longer swings out.

Close the filter cover slowly.

¡

Risk of falling when working on the appliance

Use a stable stepladder.

Do not lean over the hob.

Do not step on the hob or the work surface.

1.

Press the lock on the filter cover.

To prevent the filter cover from swinging down sud-
denly, hold onto the filter cover firmly with two
hands.

2.

Open the filter cover by pulling it downwards.

Summary of Contents for LR 7CBS2 Series

























Reviews: